Inconel 617®

Inconel 617® consists of nickel-chromium-cobalt and ® molybdenum. These elements make Inconel 617® highly resistant to oxidation and carburization. Inconel 617® can be easily fabricated; it can be hot formed up to 2200® F, and cold formed at 1900® F. Inconel 617® has excellent weldability. Inconel 617® is used for ducting, transition liners in both aircraft and land based gas turbines, and combustion cans.

Common Trade Names for Inconel 617® include:

• Inconel 617®, Nicrofer 5520®

Chemical Data for Inconel 617®

• C: .05 -.15
• Mn: 1.0 MAX
• S: .015 MAX
• Si: 1.0 MAX
• Cr: 20.0 -24.0
• Ni: 44.5 MIN
• Mo: 8.0 – 10.0
• Cu: .5 MAX
• Co: 10.0 15.0
• Co: 10.0 15.0
• Ti: 0.6 MAX
• Al: .8 -1.5
• Fe: 3.0 MAX
• W: .006 MAX

Available Forms for Inconel 617®

• Wire
• Sheet
• Plate
• Forgings
• Welding Rod

< – Return to Special Alloys

Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Source 1 Alloys is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from all available source(s). Product names are listed solely for reference to help identify products consistent with listed specifications.