A particle of a phase the has a regular external shape.
In ultrasonics, a planned, systematic movement of the beam relative to the object being inspected, the search unit being coupled to this object through a column of liquid. In most cases the object and the search unit are submerged in water.
Impact Energy (Impact Value)
The amount of energy required to ffracture a material, usually measured by means of an Izod or Charpy test. The type of speciment and testing conditions affect the values and therfore should be specified.
Test designed to determine the resistance of metal to breakage by impact, usually by concentrating the applied stress to a notched specimen.
A test to determine the behavior of materials when subjected to high rates of loading,usually in bending, tension, or torsion. The quantity measured is the energy absorbed in breaking the specimen by a single blow, as in the Charpy or Izod.
A test for determining the behaviour of materials when subjected to high rates of loading under conditions designed to promote fracture, usually in bending, tension or torsion. The quantity measured is the energy absorbed when the specimen is broken by a single blow.
Elements or compounds whose presence in a material is undesired.
A nonmetallic material in a solid metallic matrix.
Particles of impurities (usually oxides, sulfides, silicates, etc.) that are held mechanically or are formed during the solidification or by subsequent reaction within the solid metal.
Non,etallic materials in a solid metallic matrix.
The resistance of a meterial to indentation. This is the usual type osf hardness test, in which a pointed or rounded indenter is pressed into a surface under a substantially static load.
Quench hardening in which the heat is generated by electrical induction.
A process of hardening a ferrous alloy by heating it above the transformation range by means of electrical induction, and then cooling as required.
A process of heating by electrical induction.
Inert-Gas Shielded-Arc Welding
Arc welding in an inert gas such as argon or helium.
A casting suitable for hot working or remelting.
A casting for subsequent rolling or forging.
Commercially pure iron.
Commercially pure open-hearth iron.
A substance which retards some specific chemical reaction. Pickling inhibitors retard the sissolution of metal without hindering the removal of scale from steel.
Between crystals, or between grains. Same as intergranular.
The placing of a sheet of paper between two adjacent layers of metal to facilitate handling and shearing of rectangular sheets, or to prevent sticking or scratching.
An annealing treatment given to wrought metals following cold work hardening for the purpose of softening prior to further cold working.
Formation of oxides beneath the surface of a metal.
The aging of an alloy at two or more temperatures by steps, and cooling to room termperature after each step. Compare with progressuve aging.
Quenching in which the metal object being quenched is removed from the quenching medium while the object is at a temperature substantially higher than that of the quenching medium.
Interstitial Solid Solution
A solid solution in which the solute atoms occupy (interstitial) positions between the atoms in the structure of the solvent.
Within or across crystals or grains. Same as transcrystalline and transgranular.
(1) Casting metal into a mold produced by surrounding (investing) an expendable pattern with a refractory slurry that sets at room temperature after which the wax, plastic, or frozed mercury pattern is removed through the use of heat. Also called precision casting, or lost-wax process. (2) A casting made by the process.
(Chemical symbol Fe.) Element No. 26 of the periodic system; Atomic weight 55.85. A magnetic silver white metal of high tensile strength, ductile and malleable. Melting point of pure iron about 2795 (degrees) F. Chemically iron is chiefly base forming. The principal forms of commercial iron are steel, cast iron and wrought iron.
An element that has an average atomic number of 55.85 and that always, in engineering practice, contains small but significant amounts of carbon. Thus iron-carbon alloys containing less than about 0.1% C may be referred to as irons. Alloys with higher carbon contents are always termed steels.
Thinning the walls of deep drawn articles by reducing the clearance between punch and die.
A process in which a ferrous alloy is heated to produce a structure partly or wholly austenitic, and is then cooled to and held at a temperaure that causes transformation of the austenite to a relatively soft ferrite-carbide aggregate.
A change in phase at any constant temperature.
Isothermal Transformation (IT) Diagram
A diagram that shows the isothermal time required for transformation of austenite to commence and to finish as a function of temperature. Same as time-temperature-transformation (TTT) diagram or S-curve.
A pendulum type of single-blow impact test in which the specimen, usually notched, is fixed at one end and broken by a falling pendulum. The energy absorbed, as measured by the subsequent rise of the pendulum, is a measure of impact strength or notch toughness.
© 2015 Source 1 Alloy. All rights reserved.